Tips to Help Test Your Home’s Water Pressure

Dealing with water pressure issues can be a real nuisance. No matter if your shower has become a mere drizzle or your garden hose lacks its usual power, understanding and maintaining your home’s water pressure is necessary for getting things flowing again. Fortunately, evaluating your water pressure is a straightforward task that doesn’t demand special training. Find out about the simple process of testing your water pressure at home, how to understand the results and what a professional can do to correct any irregularities you find.

Why Should You Test the Water Pressure?

Getting educated about your home’s water pressure guarantees a satisfying shower, but more importantly, it shields your plumbing system from deterioration. Similar to how you routinely check the oil in your car, examining your water pressure a few times a year can prevent bigger problems in the future.

After all, low water pressure is irritating, but high water pressure can actually damage your plumbing system, including pipe connections, water heaters and appliances. The possibility of blowouts in flexible lines, like those connecting to your washing machine and dishwasher, goes up with high water pressure, potentially resulting in leaks and extensive water damage. Evaluating your water pressure and making corrective actions after looking at the results can reduce the chance of your system experiencing these issues.

Necessary Equipment for an At-Home Water Pressure Test

To start off this project, you need a basic and low-cost tool called a pressure gauge. These are readily available at hardware or home improvement retailers. When choosing a gauge, look for one with female hose threads (to easily attach to an outdoor faucet or hose bib), a rubber gasket for a tight seal and the ability to measure up to 300 pounds per square inch (psi).

Step-by-Step Guide to Testing Water Pressure

With a pressure gauge at the ready, you’re set to assess that water pressure. Just take these steps:

1. Preparation: First, ensure that all water outlets in your household are shut off. This includes faucets, showerheads, dishwashers, washing machines, refrigerator ice makers and sprinkler systems. Any water consumption while you are testing may affect your readings and give a false impression of low pressure.

2. Hook up the pressure gauge: Attach the gauge to an external faucet or hose bib. If your water is from a municipal source, connect it to the faucet that is as close as possible to the water meter for the most accurate reading. For homes connected to a well system, connect it to a hose bib close to the well’s pressure tank.

3. Measure the pressure: Tighten the gauge by hand and open the faucet all the way. Now, look at the readout to find the pressure. A recommended reading runs from 45 to 55 psi. If your reading is below 40 psi or greater than 80 psi, it’s time to seek assistance.

Resolving Water Pressure Abnormalities

Here are remedies to solve water pressure problems:

  • High pressure: Set up a water pressure regulator on your water main. This device restricts your water pressure to a maximum flow of 75 psi. Even if you already have a regulator, it’s a good idea to check the pressure regularly, as equipment can fail without you knowing.
  • Low pressure: To begin with, inspect any pre-existing pressure regulators, which should be set to approximately 50 psi. Adjusting the screw on top generally helps to improve flow. If a pressure regulator isn’t the issue, the problem might be with the municipal water provider. In instances like this, installing a water pressure booster may increase the flow.
  • Normal pressure: If your pressure falls in the appropriate range, no further action is necessary. Just remember to test your water pressure regularly to ensure it stays within this range.

When to Call an Expert for Water Pressure Problems in Buffalo

If you’re uncertain about testing the water pressure in your own home, or if you’ve identified an issue that requires professional attention, don’t hesitate to call Sunbeam Service Experts. Our experienced plumbers can help you test your water pressure, diagnose what’s wrong and ensure no fixtures have been negatively affected by high pressure. We can also assist with putting in a pressure regulator or booster if needed. Thanks to our 100% satisfaction guarantee, you can trust us to make the correct fix the first time around. The next time you face water pressure problems or other plumbing concerns in Buffalo, call Sunbeam Service Experts to schedule an appointment. We’re here when you need us!